
8
{GB
Instructions}
36
To attach hood, place hood mounts in between
notches on both sides of the pushchair frame as shown.
37
Fasten hood poppers to top of seat as shown.
38
-
39
To recline, pull up on handle at top of seat as
shown and lower.
40
To raise seat back, pull up on handle at top of seat.
41
To remove seat from frame, squeeze release handles
at sides of seat and pull up off pushchair frame.
Securing Your Child
42
Press button to unlock harness.
43
Pull buckles from crotch strap.
44
To lock, insert buckles into crotch strap buckle.
45
Use slide adjusters to adjust harness to tighten or
loosen fit.
Adjusting Harness Height Position
46
Unfasten 2 poppers at top of seat pad.
47
Pull harness straps off metal clip. Repeat on other
side.
48
Push harness straps through to front of seat pad.
49
Insert harness straps into the correct harness height
position needed for your child. Make sure both harness
straps are inserted and connected to their corresponding
height positions.
50
Reattach harness straps to metal clips.
51
Reattach top of seat pad with 2 poppers as shown.
Using Reversible Handle:
You can reverse the handle position in an instant with one
hand. This changes the configuration of your pushchair to
have your child either in front of you to interact with, or
facing forward to see the same as you do.
• Swivel wheels in front are better for great maneuverability
• Pneumatic tyres in front provide more comfort for
outdoor use in the park or the forest for example.
52
To change handle position, squeeze handle release
and rotate to front or rear of pushchair depending on
which handle orientation you desire.
53
-
54
Reversible handle with toddler seat installed.
Using the Baby Bag
55
There are 3 hooks on the rear of the toddler seat for
attaching the baby bag (Weight limit is 2 kg).
56
Attach straps from baby bag to metal clips as shown.
Using the Footmu
57
Unbuckle harness.
58
Unhook straps from metal clips.
59
Lay footmuff in seat and pull the crotch strap through
footmuff.
60
Pull the waist straps through slots as shown.
61
Reattach the harness straps at the desired level.
62
Place flaps over top of seat as shown.
63
Fasten zipper around footmuff as shown.
Using the Toddler Seat Raincover
64
Place raincover over pushchair as shown. Fasten
poppers on raincover to the inside hood mounts as shown.
Fasten zipper on rear of the raincover as shown.
65
-
66
To use raincover with the babybag attached,
you will need to undo the raincover poppers at side of
panel in order to attach your babybag to the back of the
seat.
Once the poppers have been undone and you have
attached the babybag, you can fasten zipper at rear of seat.
Using the Carseat Raincover
67
Place raincover over carseat as shown. Always remove
raincover before placing in vehicle.
Removing Seat Pad for washing
68
Undo 2 poppers at top of seat.
69
Remove harness straps from metal clips.
70
Unfasten poppers on both sides of the pushchair seat
pad.
71
Pull waist straps through slots in sides of seat pad.
72
Unfasten 2 poppers on the footrest.
73
Push crotch strap through pad.
74
Seat pad can now be washed.
Comentarios a estos manuales