Graco 313528E Manual de usuario Pagina 22

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 46
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 21
Electronic Crossover Operation
22 313528E
Electronic Crossover Operation
NOTE:
These instructions are for the display module func-
tions used on tandem systems. For basic ram and
pump operation, refer to the component manuals
supplied.
Pressure Relief Procedure
1. Lock the gun/valve trigger.
2. Press On/Off key . If system is On, display will
highlight . Select to turn off.
3. Turn off the air motor slider valve (BF) on both ram A
and B.
4. On both ram A and B, turn off the main air slider
valve (BA). Set the ram director valve (BC) to the
down position. The ram will slowly drop.
5. Unlock the gun/valve trigger.
6. Hold a metal part of the gun/valve firmly to the side
of a grounded metal pail, and trigger the gun/valve
to relieve pressure.
7. Lock the gun/valve trigger.
8. On both ram A and B, open the fluid line drain valve
and/or the pump bleed port. Have a container ready
to catch the drainage.
If you suspect that the spray tip/nozzle or hose is com-
pletely clogged, or that pressure has not been fully
relieved after following the steps above, very slowly
loosen the tip guard retaining nut or hose end coupling
and relieve pressure gradually, then loosen completely.
Now clear the tip/nozzle or hose.
Flush Before Using Equipment
The pump was tested with lightweight oil, which is left in
the fluid passages to protect parts. To avoid contaminat-
ing your fluid with oil, flush the pump with a compatible
solvent before use. See your pump manual for flushing
directions.
Startup
1. On both ram A and B, turn on the main air slider
valve (BA). Set the ram director valve (BC) to the
down position. The ram will slowly drop.
2. Turn on the air motor slider valve (BF) on both ram A
and B.
FIG. 7: System Function Screen
FIG. 8. Integrated Air Controls
BA
BB
BC
BE
BF
TI10438A
Vista de pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 45 46

Comentarios a estos manuales

Sin comentarios