Graco 313528E Manual de usuario descargar pdf (Pagina 35)

Appendix A - User Interface Display

313528E 35

Hardware Setup Screens

The Hardware Setup screens enable users to specify if

specific hardware is installed on the system and to

adjust hardware settings. Press to scroll

through the Hardware Setup screens. Once in the

desired Hardware Setup screen, press to access

the fields to make changes. Press to exit edit

mode.

NOTE: Must exit edit mode to scroll through the

Hardware Setup screens.

Hardware Setup Screen 1

This screen enables users to specify if a fluid filter moni-

tor is installed, and set the high and low limits for the

pressure drop across the filter.

Monitor the filter pressure readings through the normal

range of flow with a clean filter to establish the initial limit

settings.

Hardware Setup Screen 2

This screen enables users to specify if a fluid solenoid is

installed, and if a drum low sensor is installed. The fluid

solenoid controls the depressurize/recirculate valve.

Icon Function

Select what type of error will be issued if fil-

ter pressure drops below the low limit or

raises above the high limit. Select to

disable filter monitoring or if there is no fil-

ter installed on the system.

Set low limit (0-1000 psi) for pressure drop

that will issue an error. Set the low limit to

detect a filter element collapse or a missing

element.

Set high limit (0-5000 psi) for pressure drop

that will issue an error. Set the high limit to

detect a clogged filter.

FIG. 23: Hardware Setup Screen 1 (Filter)

Icon Function

Select if fluid solenoid is installed on sys-

tem. Set for A and B rams.

Select if drum low sensor is installed on

system. Set for A and B rams.

IG. 24: Hardware Setup Screen 2

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 45 46

Comentarios a estos manuales

Sin comentarios

Graco 313528E Manual de usuario Pagina 35

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores Graco 313528E