Graco 313528E Manual de usuario descargar pdf (Pagina 33)

Appendix A - User Interface Display

313528E 33

Setup Mode Screens

Setup mode screens are divided into six sections: pass-

word, system setup, heat zone setup, maintenance

setup, hardware setup, and advanced setup.

Password Screen

While in Run mode, press the Setup button. If the

password is not set to 0000, the Password screen will

appear. Enter the password to continue to Setup mode.

NOTE: Upon the first system startup, the System

Setup screen will display. Otherwise, the last setup

screen viewed will display.

Set Password

To set the password, press to enter the screen.

Press to select digit to change. Press

to set value for each digit. Press

again to enter the password.

System Setup

The System Setup screen enables users to configure

system settings for the ram(s). Press to access the

fields and make changes. Press to exit edit mode.

IG. 20: Password Screen

Icon Function

Select tandem operation, ram A only oper-

ation, or ram B only operation.

Select if a Not Primed event will issue an

alarm or deviation.

Set number of minutes (1-9) for priming.

Set pump cycles per minute that will issue

a pump runaway alarm. Set between 0 and

99; default setting is 60 cycles; 00 setting

disables this function.

IG. 21: System Setup

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 45 46

Sin comentarios

Graco 313528E Manual de usuario Pagina 33